Drivers are being warned that grime covering lights, number plates and windscreens could create avoidable problems at their next MOT.

A quick cosmetic wash may not be enough. Filipa Silva, cleaning and car care expert at Nilfisk, has identified five commonly missed areas motorists should clean and inspect before the test.

The checks include lights, number plates, windscreens, wheel arches and other areas where compacted dirt could obscure damage. Cleaning will not fix a faulty component, but it can reveal issues early and ensure important parts can be seen clearly.

Silva said: “Many drivers tidy the cabin and wash the most visible bodywork before an MOT, but the safety-critical areas are easy to miss. The aim is not to make a car look showroom-ready. It is to clear away dirt so that the number plates, lights, windows and other components can be seen and checked properly, while giving yourself a chance to notice damage that may need professional attention.”

1. Clean and check every light

Road spray can leave a film across headlamps, brake lights, indicators, fog lights, reversing lights and reflectors, making them harder to see.

With the car safely parked and switched off, clean each lens using a microfibre cloth and a suitable vehicle-cleaning product. Then ask someone to help test every light. A failed bulb, cracked unit or badly adjusted beam needs repairing; wiping it clean is not enough.

2. Make both number plates easy to read

Mud and winter grime can quickly obscure front and rear registration plates, particularly after wet motorway or rural journeys.

Wash both plates gently and check every character is clear. Look for damage, delamination, incorrect spacing or anything that interferes with the plate’s appearance. If the plate is not compliant, arrange a replacement before the test.

3. Do not forget the inside of the windscreen

The MOT includes the driver’s field of vision, the windscreen, wipers and washers. Dirt outside, greasy residue inside, worn blades or blocked washer jets can all affect visibility.

Clean both sides of the glass, carefully wipe the wiper edges and top up the reservoir with an appropriate screenwash mixture. Test the spray and replace blades that split, detach or fail to clear the swept area properly.

4. Rinse away salt that could hide rust

Repeated exposure to road salt can accelerate corrosion where moisture remains on metal. Serious corrosion in prescribed structural areas can result in an MOT failure.

Following the vehicle and equipment instructions, rinse accessible wheel arches and underside areas from ground level using a suitable pressure setting. Keep clear of electrical parts, damaged seals and sensitive components, and never crawl beneath a car supported only by a jack. Flaking metal, holes or significant rust should be inspected by a qualified professional.

5. Remove grime that may conceal leaks or damage

Compacted mud can hide fluid leaks, loose parts and visible damage. A careful wash of accessible areas gives motorists a better opportunity to identify a problem before the appointment.

Do not use cleaning products on brakes, tyres or other safety-critical components unless the product and vehicle manufacturers specifically permit it. Any leak, insecure part or damage should be assessed and repaired properly.

Silva added: “Give yourself time to clean and inspect the car before the test, rather than rushing on the morning of the appointment. If you uncover a warning light, damaged lamp, split wiper, cracked plate or serious corrosion, book the appropriate repair. A clean car helps you see what is there; it does not change whether a component is safe or roadworthy.”

Cleaning is not a shortcut to passing an MOT. Dangerous or major defects will still result in failure, while minor defects and advisory items may be recorded. The benefit of cleaning early is that it can expose a problem while there is still time to arrange a repair.